Abstract:
Waste polyethylene (PE) bags were reused in the modification of commercially available bitumen. The bitumen/PE blend was prepared by mixing homogenously commercial bitumen with waste PE in the molten state. The samples of bitumen blend and bitumen base were rheologically analyzied. The rheological properties such as complex modulus, shear compliance, torque and complex viscosity of bitumen and bitumen blend were studied using an ARES- Rheometer (Rheometric Scientific, Co.) in the dynamic mode, plate-plate geometry with diameter 8 mm. The measurements were performed over a wide range of temperatures ranged from-10°C to 60°C and frequencies from 100 to 0.1 radians per second. The results evidence that the shear compliance and torque are improved by the incorporation of the waste PE into bitumen.
|